Sourcing Cluster Guide · Electronics
The hardware capital of the world — where a full prototype can go from drawing to shipped container in six weeks.
Shenzhen produces the majority of the world's consumer electronics by value. The city and its immediate neighbours host the complete chain: Huaqiangbei for components, Bao'an and Longgang for assembly plants, and Nanshan for industrial design and firmware teams. Roughly nine out of ten of the world's electronics accessories — chargers, cables, power banks, earbuds, phone cases — pass through Shenzhen supply chains at some point, and the city handles well over a hundred billion dollars of electronics exports a year.
The depth is what separates Shenzhen from any other electronics hub. Within a 30 km radius a buyer can reach PCB houses, SMT lines, injection moulders, die-casters, battery pack assemblers, cable extruders, anodizers, and certification labs that issue CE, FCC, RoHS, UN38.3 and PSE paperwork. A new TWS earbud or GaN charger can be tooled, sampled, certified and in mass production within 6–10 weeks, because every supplier in that chain already lives next door to the others.
For overseas buyers this is both an advantage and a trap. The advantage is speed and price; the trap is a market of thousands of trading companies that claim to be factories, and consumer-electronics specs where a 200 mAh battery difference or a missing UN38.3 report can stop a shipment at customs. That gap — between a great sample and a compliant, repeatable production run — is precisely what a local sourcing partner closes.
Trial orders usually start at 500–1,000 pcs per model for branded accessories and 100–300 pcs for higher-value items. Lead time runs 20–35 days after sample approval, plus 2–4 weeks if new tooling or certification is needed. Always insist on a golden sample signed off before mass production, and book AQL 2.5 inspection plus a functional burn-in test — plus battery UN38.3 and IEC 62133 reports before any air shipment.
21 representative product lines with typical export specifications. Every product below is available through our vetted supplier network in Shenzhen, Guangdong.
Shenzhen's highest-volume audio export; ANC models now dominate the mid-tier.
| Chipset | Bluetooth 5.3 / 5.4, BES or JL platform |
| Driver | 13 mm dynamic, 20 Hz–20 kHz |
| Battery | 40 mAh per bud / 400 mAh case, 24–30 h total playback |
| ANC depth | up to -35 dB hybrid feedforward + feedback |
| Certification | CE, FCC, RoHS, TELEC on request |
| MOQ | 500 pcs; custom logo from 1,000 pcs |
IPX7 waterproof outdoor speakers with TWS pairing and RGB lighting options.
| Output | 5 W / 10 W / 20 W RMS options |
| Driver | 45–66 mm full range + passive radiator |
| Battery | 1,800–5,000 mAh, 8–20 h playtime |
| Ingress | IPX7 (1 m / 30 min) |
| Certification | CE, RoHS, FCC, UN38.3 |
| MOQ | 500 pcs per model |
PD/QC fast-charge power banks with digital display and built-in cables.
| Cells | A-grade 21700 / polymer, 10,000–20,000 mAh |
| Output | 22.5 W PD + QC3.0, 2×USB-A + 1×USB-C |
| Input | 18 W USB-C PD recharge, 4–6 h |
| Protection | over-charge / over-discharge / short-circuit / NTC |
| Certification | UN38.3, IEC 62133-2, CE, RoHS, MSDS |
| MOQ | 500–1,000 pcs per model |
Compact GaN III wall chargers for laptop and multi-device charging.
| Topology | GaN III, 30 W / 65 W / 100 W / 140 W |
| Ports | 1C / 2C1A / 3C1A with intelligent power allocation |
| Input | 100–240 V AC, 50/60 Hz, interchangeable plugs |
| Efficiency | ≥ 90%, surface temp ≤ 60 °C at full load |
| Certification | CE, CB, UL, FCC, PSE, CCC |
| MOQ | 1,000 pcs per power class |
E-marked braided cables with full data and power compliance.
| Conductor | 28/22 AWG oxygen-free copper, 60 W–240 W E-mark |
| Data rate | USB 2.0 / USB 3.2 Gen2 10 Gbps options |
| Jacket | nylon braid, 10,000+ bend life, TPE strain relief |
| Length | 0.5 / 1 / 1.5 / 2 / 3 m |
| Certification | USB-IF, CE, RoHS |
| MOQ | 1,000 pcs per length |
Moulded cases for iPhone, Samsung and Xiaomi flagships, refreshed every launch cycle.
| Material | TPU, PC+TPU 2-in-1, PU leather, aramid fibre |
| Features | MagSafe magnet ring, camera lip, anti-yellowing TPU |
| Drop rating | 1.5–3 m MIL-STD-810G drop test |
| Finish | matte, glossy, IMD, UV print, laser engrave |
| MOQ | 200–500 pcs per model/colour |
| Packing | poly bag or retail box with hanger |
1.4–1.96 inch AMOLED wearables with HR, SpO2 and Bluetooth calling.
| Display | 1.43" AMOLED 466×466, always-on option |
| Sensors | PPG heart rate, SpO2, accelerometer, optional ECG |
| Battery | 300–450 mAh, 7–14 days typical use |
| Ingress | IP68 / 3 ATM, BLE 5.2, iOS 12+ / Android 8+ |
| Certification | CE, RoHS, FCC, MSDS |
| MOQ | 500 pcs per model |
2K–4K IP cameras with AI human detection and cloud/local storage.
| Resolution | 2 MP / 4 MP / 8 MP, 1/2.8" CMOS |
| Lens | 2.8–4 mm fixed or 4× zoom, IR 20–30 m |
| Compression | H.265+, ONVIF Profile S/T |
| Storage | microSD up to 256 GB, NVR, cloud |
| Ingress | IP66 outdoor rated |
| Certification | CE, FCC, RoHS, GDPR-compliant firmware option |
Single and dual-channel dash cams with GPS, parking mode and night vision.
| Resolution | 1080P / 2K / 4K front, optional 1080P rear |
| Sensor | Sony STARVIS or equivalent, f/1.8 |
| Field of view | 140°–170° diagonal |
| Power | 5 V / 2 A USB-C, supercapacitor option |
| Certification | CE, FCC, RoHS, E-mark for EU |
| MOQ | 300–500 pcs |
Indoor and outdoor SMD LED modules for signage and video walls.
| Pixel pitch | P1.86 / P2.5 / P3 / P4 / P5 / P10 |
| Brightness | 800–1,200 nits indoor; 5,000–6,000 nits outdoor |
| Refresh rate | ≥ 3,840 Hz, 14–16 bit greyscale |
| Cabinet | die-cast aluminium 640×480 / 960×960 mm |
| Lifespan | 100,000 h to 50% brightness |
| Certification | CE, RoHS, ETL option |
Consumer drones and spare-part kits — frames, motors, ESCs, gimbals and props.
| Classes | sub-250 g, 4K camera drone, FPV freestyle |
| Flight time | 18–35 min depending on battery |
| Range | 1–10 km video transmission options |
| Camera | 4K/30fps–6K, 3-axis gimbal stabilization |
| Compliance | FCC / CE, remote ID module option |
| MOQ | 100–300 pcs |
Qi2 and 15 W magnetic wireless chargers, 3-in-1 travel stands.
| Standard | Qi 1.3 / Qi2 15 W, Apple MagSafe compatible |
| Output | 5 W / 7.5 W / 10 W / 15 W |
| Coil | single or 3-in-1 (phone + watch + buds) |
| Efficiency | ≥ 72%, FOD foreign-object detection |
| Certification | CE, FCC, RoHS, Qi certificate |
| MOQ | 500 pcs |
Multiport adapters and Thunderbolt-class docks for laptop productivity.
| Ports | HDMI 4K60, 2×USB-A 3.0, SD/microSD, PD 100 W pass-through |
| Chipset | DisplayLink / VIA / Realtek options |
| Video | single 4K60 or dual 4K30 |
| Housing | anodized aluminium, 20–60 cm braided pigtail |
| Certification | CE, FCC, RoHS, USB-IF |
| MOQ | 500 pcs |
Head straps, facial interfaces, lens inserts, link cables and charging docks.
| Fit | Quest 3 / 3S / Pico 4 generics |
| Materials | PU leather, breathable mesh, ABS, silicone |
| Cables | 5 m active USB-C link, 5 Gbps |
| Battery | 5,000–10,000 mAh head-strap packs |
| MOQ | 300–500 pcs per SKU |
| Packing | retail box with foam insert |
Wi-Fi/Zigbee plugs, PIR sensors, door contacts and hubs for Tuya/Smart Life ecosystems.
| Protocol | Wi-Fi 2.4 GHz, Zigbee 3.0, Matter option |
| Rating | 10 A / 16 A, 100–240 V, 2,300 W max |
| Functions | energy monitoring, timer, scene linkage |
| App | Tuya / Smart Life, Alexa & Google Home |
| Certification | CE, RoHS, FCC, UKCA |
| MOQ | 500–1,000 pcs |
NVMe portable SSDs and USB 3.2 enclosures with aluminium heat-spreader bodies.
| Interface | USB 3.2 Gen2 10 Gbps / Gen2x2 20 Gbps |
| Capacity | 256 GB–4 TB, M.2 2280 NVMe |
| Speed | up to 1,050 MB/s read (10 Gbps) |
| Housing | CNC aluminium, 2 m drop rated |
| Compatibility | Windows, macOS, PS5, Android |
| MOQ | 200–500 pcs |
Bluetooth gamepads, telescopic mobile controllers and hall-effect joystick upgrades.
| Connection | BT 5.0 / 2.4 GHz dongle / USB-C wired |
| Sticks | hall-effect, no-drift, 1,000 Hz polling option |
| Battery | 800–1,200 mAh, 10–20 h playtime |
| Platforms | Switch, Android, iOS, PC, Steam Deck |
| Certification | CE, FCC, RoHS |
| MOQ | 300–500 pcs |
PD car chargers, wireless car mounts, tyre inflators and jump starters.
| Output | 30 W / 45 W / 65 W PD + QC, 12–24 V input |
| Inflator | 150 PSI, digital gauge, auto-stop accuracy ±1 PSI |
| Jump starter | 1,000–2,000 A peak, 12 V, 8,000–20,000 mAh |
| Certification | CE, RoHS, FCC, UN38.3 |
| MOQ | 300–1,000 pcs |
Portable LCD/DLP projectors with Android TV and auto-keystone.
| Native resolution | 720P / 1080P, 4K decoding support |
| Brightness | 200–600 ANSI lumens |
| Throw | 1.2:1, 30–150 inch image |
| System | Android 11+, dual-band Wi-Fi, BT 5.0 |
| Lamp life | 20,000–30,000 h LED |
| Certification | CE, FCC, RoHS |
LiFePO4 outdoor power stations with MPPT solar input for camping and backup.
| Capacity | 300 Wh / 500 Wh / 1,000 Wh / 2,000 Wh |
| Chemistry | LiFePO4, 3,000+ cycles to 80% |
| Output | AC 300–2,000 W pure sine wave, 110 V/230 V |
| Solar input | MPPT, 100–400 W, 12–48 V |
| Certification | UN38.3, UL2743, CE, RoHS |
| MOQ | 100–300 pcs |
Magnetic folio keyboards, stylus pens and stands for iPad and Android tablets.
| Connection | pogo-pin or BT 5.1, 3-device pairing |
| Keys | scissor switch, 1.5 mm travel, backlit option |
| Battery | 500–1,000 mAh, 60–180 h typing |
| Compatibility | iPad 9–11", Galaxy Tab, generic 10–13" |
| MOQ | 300–500 pcs |
| Packing | retail box with USB-C cable |
Tell us the products and quantities — we reply within 24 hours with supplier options, sample costs and an all-in quote.